10L laboratory medical transport ice cooler box
Cold Chain Boxes, specially designed to hold temperatures within essential safe temperature limits without electricity during transport or use for: vaccines, blood, veterinary , laboratory, Biopharmaceutical, Life Science and other Medical Products, VD products and biological specimens , National Health Service,WHO,UNICEF, Blood & Tissue Transplant Agencies, Selected fresh food, drink and dairy products.
Category |
Medical cooler box |
Main Material |
XPS/EPE composite insulation board with VMPET outer cover-3cm thickness |
Application |
Food like ice cream,Medical, vaccine, blood storage |
Dimension |
Outer Dimension:40.5x26.5x33cm Inner Dimension:32x18.5x25cm |
Cold source |
3pcs of ice brick HTBH285+2pcs of ice brick HTBH165 |
Cold life |
Ambient temperature: not above 30 deg.C, hold articles inside at 2 deg.C to 8 deg.C about18 hours |
Capacity |
10L |
Application
Cold Chain Bags and Boxes, specially designed to hold temperatures within essential safe temperature limits without electricity during transport or use for: Vaccines,Insulin,Biopharmaceutical, Life Science and other Medical Products,IVD products and biological specimens,Selected fresh food, drink and dairy products
Usage
1. Before using, wipe the non toxic sealed HT Ice Bricks dry, and place into a freezer until they are fully frozen (about 10 hours). If using HT Ice Packs, fill with clean fresh water, firmly replace the screw cap, then follow the same procedure.
2. Remove the frozen packs from the freezer, and place every pack into the box in the positions indicated, and close the lid.
3. When the temperature of the box reduces to below 8°C, open the lid and place the contents to be kept cold in the cold transport container. Close the lid.